- Site Map >
- Modding and Creation >
- Creator Feedback Forum >
- Sims 3 >
- Worlds/Neighborhoods - The Town of San Simeon (Due for remake)
- Site Map >
- Modding and Creation >
- Creator Feedback Forum >
- Sims 3 >
- Worlds/Neighborhoods - The Town of San Simeon (Due for remake)
Posts: 61
Thanks: 100 in 2 Posts
It is the first of my two attempts at a Filipino themed save in Isla Paradiso; my other one was built on the same place (and takes place in the same continuity, story-wise) but takes place in the 14th Century, a two centuries before the colonial era.
If I manage to succeed in creating the separate world versions, I might make (and possibly upload) two versions of the world :D.
I originally made this for an attempt at a historical legacy challenge. It is initially a save and not a full-on world (more on that later). My main difficulties had been in designing the interiors and populating the areas, though this is mainly because of the scale of the project. Besides a remake and rebuild, I am also planning to have it turned into a downloadable full world. Feedback is appreciated.
Inspiration
I drew inspiration for many of the structures from photographs of historic structures from the following places:
- Pre-WWII Manila, particularly around the old city of Intramuros
- Taal, Batangas
- Vigan, Ilocos Sur
- Las Casas Filipinas de Acuzar (A living history museum)
- Images from the Ayala Museum's famous dioramas
Although most of the structures were my own, I am not above adding structures created by others, though this might change should this become an actual downloadable. I had contacted Amichan619 to use two of the structures used in his town San Felipe as add-ons. I was pleasantly surprised to know that Amichan had known of my build.
Background
I mostly work in world conversions, taking pre-built worlds and altering them to suit my purposes. It's... not quite CAW. The entire process seemed too difficult at the time and this seemed like the easier proposition initially. Only when the nonremovable bits proved too troublesome did I ponder on building on a fresh world. In any case, the world is due for a remake.
A little history regarding the build. As mentioned, I was inspired to build it from scratch for a historical legacy challenge (it adds versimilitude). Familiarity plus the opportunity to portray my country's culture and history led me to choose this milieu, pegging my legacy at the end of the 18th Century during the Spanish era. My tumblelog has the complex mess of rules just to ensure accuracy. Of course, one of the appeals of a legacy challenge was to start from nothing, a difficult proposition for the Philippines that hadn't had a setting fit for a settler narrative since before the Spanish arrived.
Indeed, I ended up creating the second world, Kedatuan, out of a desire to fully start from as bare a slate as possible and because I needed to build less for it and because it allows me to build the community gradually. Essentially, Kedatuan (Malay for "Principality") is San Simeon before the Spanish came, a settlement established in the 14th Century by a political alliance between Southeast Asian kingdoms.
Posts: 61
Thanks: 100 in 2 Posts
Churches
Iglesia de San Simeon, inspired by part by the Manila Cathedral and St. Augustine's Church
Iglesia de San Jacinto, based (almost directly) on St. Joseph's Parish in Las Pinas City, my current town of residence and home to a pipe organ made of bamboo.
Residences and Domestic Architecture
Other Buildings of Note
Mercado de Agua Marina, a conversion of OnePracticalGhosts's Sea Spray Shops
Parian Cemetery, inspired by portions of the Manila Chinese cemetery, Chinese gardens in general, and the Forbidden City.
Casa de Romano de Oriente (Jesuit museum) and movie theater. The Jesuit house was inspired by Casa Bizantina at Las Casas museum.
St. Mary's Academy
Fort St. Simeon (The Governor's Office). This might be a misnomer since it's not actually fortified. The actual fort would be built further down (though I'm considering building it up).
Posts: 3,456
Thanks: 937 in 5 Posts
If this helps, I have a Isla Paraiso CAW file with some buildings you might find helpful!
http://potato-ballad-sims.tumblr.co...-years-gift-for
Posts: 61
Thanks: 100 in 2 Posts
Definitely loving the new setting! If this helps, I have a Isla Paraiso CAW file with some buildings you might find helpful! http://potato-ballad-sims.tumblr.co...-years-gift-for |
Thank you. I've seen your Isla Paraiso thread recently (it's even set at roughly the same time as I originally pegged San Simeon to be at, give or take 10 years). It's also the reason why I'm considering building the fort up the hill instead of down by the coast as I originally intended, though the jury's still out on that one.
I may be using your lighting mod in some of the pictures.
Posts: 61
Thanks: 100 in 2 Posts
I find it incredibly easy to do what I call gut-and-finish, wherein I take a preexisting house in a TS3 world and modify its exteriors and interiors. This was how I built the original save's business building. In this case, the edited Isla Paraiso had a cluster of unfinished buildings close to the port. I added a few architectural flourishes here and there...
And we have the seaport market district!
This basically became the area surrounding the Spanish custom's house (which one is the customs house I am currently not sure). This represents my first non-CC attempt for the project; the only non-expansion item are the stained glass windows used in the main building which I think might be the best candidate for the customs house. All in all, I liked how it turned out, especially since I'm usually so keen on defaulting to the CC cornices/friezes I used in the initial build. The Spanish colonial gateway arch is my personal favorite, especially since it turned out so well.
Essentially, this will become the place to put the WA registers, save for the one with the books. and perhaps also serve as the consignment store, if I don't put it on a dedicated market lot. Also, is the shiny, well-maintained look of this part of town sensible or should I make it more grungy to highlight the whole market/port feel of the area?
I still haven't figured out how to make the terrain not look like mud.
Posts: 3,456
Thanks: 937 in 5 Posts
If that doesn't work, there should be a textureslist .ini file inside the world file that also needs to be deleted (it'll regenerate). Back up the file though.
I'll check and find out the exact files when I can.
Posts: 61
Thanks: 100 in 2 Posts
You need to clean out your Documents CAW folder except for the User folder the textures and worlds are located in. Also delete your world cache folder in the main Sims Document folder. If that doesn't work, there should be a textureslist .ini file inside the world file that also needs to be deleted (it'll regenerate). Back up the file though. I'll check and find out the exact files when I can. |
What folders should get the axe, specifically? I parked many of the world building files outside the CAW folder and edited from there. Could this be a contributing factor?
Posts: 3,456
Thanks: 937 in 5 Posts
Then inside the world file itself (using S3PE), a _KEY file called TextureDatabase (will regenerate itself). I think the issue comes from the database corrupting and not loading the textures properly.
As always remember to backup your file.
Tip for eliminating stray texture files: If you have the textures saved and linked to the world file, you can also delete all the named texture _IMGs (the linked images will reload)- sometimes after you change a texture image, the actual file remains in the world- deleting them will reduce the file size.
Posts: 61
Thanks: 100 in 2 Posts
Posts: 27
Posts: 61
Thanks: 100 in 2 Posts
Great work. I liked the fact that you utilized EA content for the colonial architecture especially the walls and the capiz windows. It perfectly captured the look and feel of Calle Crisologo in Vigan and some buildings in Intramuros to a lesser extent. |
It was very fortuitous, really. Getting the look was largely the product of trial and error. The walls were very tricky: it took awhile to get the right swatch of paneled walls to make the second floors and to add sufficient masonry detail to the first floors (this is especially apparent in Vigan, where the first floors weren't usually flat). The first floor windows are even more of a challenge. My best results were from using conversions from Apartment Life or by alternating between wall and grill fence and hiding the joins in an arch. The Spanish windows I used for the customs house are, admittedly a bit too big.
When improvising the look of the Capiz windows, I needed to find content that fitted at least two of three criteria:
- Small square panes
- An appearance that evoked or wouldn't look out of place in the 19th Century
- Translucence
The Supernatural windows were incredibly close in appearance to the capiz windows, differing only in that they used transparent glass. The perfect combination of all three was actually a sliding screen door, one that I couldn't use for all the builds (though they work beautifully for the larger buildings with the requisite tiny balconies, like those imitating Casa Manila in Intramuros and Casa Bizantina at Las Casas). In general, I found the Supernatural stuff to be some of the most helpful when making the build, if only because that pack had an antique old world look as part of its theme. The Edwardian window was a very recent experiment inspired by the stained glass also used at the time.
Posts: 61
Thanks: 100 in 2 Posts
Perhaps this may be a compatibility issue as well. My version of CAW is 0.2.0.197, whereas my version of the Sims 3 and its plethora of expansions is the non-Origin version at 1.67.2.024001.
Posts: 3,456
Thanks: 937 in 5 Posts
http://modthesims.info/t/448987
Also try clearing your worldcache files in all folders.
Posts: 1,597
Thanks: 3217 in 15 Posts
Need help building? Click Here
CAW Guide for Beginners - Northeney - Woeford - Cronor - Saturenorn - Lago Simiore
Posts: 61
Thanks: 100 in 2 Posts
Have you tried to reassign the textures to their respective layers? Brown mud means that caw doesn't find the textures. They are stored on absolute paths, and the one from jje1000 is probably a different one than yours. |
I have considered this possibility. Would the files need to be changed in S3PE or in CAW?
Posts: 1,597
Thanks: 3217 in 15 Posts
In CAW you can check which textures are required by looking at the path (my game is localised but I'm sure you will find your way). Right click on a terrain layer in the terrain tools to open the window. This is also the place where you would re-assign the texture.
Now that you have the name of the texture you can look for it in the original caw world file with s3pe. Export and save it to your own Source textures folder (you can also make sub-folders). Now re-assign the texture by opening the above window and clicking the little button with 3 dots on the right of the path.
I would recommend not only to delete the key ressource but all IMG-ressources once. This usually reduces file size quite a bit and also removes unneeded stuff from your world file. For this it would be necessary that you have all required recolours, lighting colour ramps and textures (roads, terrains) available for re-import into the world file, especially if you edit a world made by others. Here is a tutorial which also adresses the brown mud issue. You can find all required files with the method I described above.
Need help building? Click Here
CAW Guide for Beginners - Northeney - Woeford - Cronor - Saturenorn - Lago Simiore
Posts: 61
Thanks: 100 in 2 Posts
In CAW. If you don't have the textures, maybe jje1000 can provide them or you can get them from the original world file with the help of s3pe. |
The original file came with them, hence why I thought about the files being misplaced somehow. I'll be trying this out within the next few hours. Thanks.
Posts: 61
Thanks: 100 in 2 Posts
Posts: 61
Thanks: 100 in 2 Posts
Then, I goofed at the textures a bit and the shore looks less "fancy Philippine rural island that hotel developers long for" and more "the coast of Manila". This too was eventually resolved.
I first started with a large central staircase, which was really difficult to place. I planned to have a stone staircase. After telling myself, "I'd hate to be the guy who had to carry the undoubtedly heavy trade goods all the way up those stairs," I asked my dad, a civil engineer, whether it was plausible. Now, asking my dad for help when making Sims 3 buildings is a double-edged sword. On one hand, he is an engineer and knows what he's talking about when it comes to how buildings and infrastructure work in real life. On the other hand, he doesn't play Sims 3 and isn't very good at history. So his advice, while helpful, also entailed building something with more modern sensibilities. It was his idea to build the stairs parallel to the walls instead of perpendicular to them, and because of this the stairs had to become wooden.
It was a long process.
It became a modern leisure port and tourist area; currently missing are the many kiosks catering to the local and foreign tourists.
I'll be altering it a bit later to make it less... well... safe for people to walk in.
Enjoy it in full color!
Posts: 368
Thanks: 1103 in 7 Posts
You're doing a great job with the buildings, both the interiors and the exteriors look very authentic.
Keep up the great work!
Posts: 61
Thanks: 100 in 2 Posts
I love it when people build worlds in a style or theme that hasn't been attempted before (or barely attempted), and San Simeon is looking great You're doing a great job with the buildings, both the interiors and the exteriors look very authentic. Keep up the great work! |
I appreciate the feedback a lot, especially coming from people who've created rather spectacular worlds themselves. I've jje1000 to thank for lending me the de-modernized version of Isla Paradiso (and for the lighting mod that I now use extensively in my saves).
The authenticity bit is what gets to me. I did a lot of research for the whole project (San Simeon and its prequel of sorts the Kedatuan) to approximate the look of the buildings as close as I can, within the limits of what the game had on hand.
Posts: 61
Thanks: 100 in 2 Posts
Posts: 61
Thanks: 100 in 2 Posts
The world file I'm editing has in it a large building embedded in the plaza. I hoped to keep it since, with luck, I can make the structure(s) blend into the city and keep it looking nice and built up. However, I'd also like to give the structure a purpose, one that would suit a building its size. My first attempt was to turn it into a large-ish structure in the city center, as seen below; I plan to give it a further baroque makeover. It would house at least two rabbit holes.
Historically, a building this size is often reserved for the government or the church, both of which have already been represented by the school and the civic center. The missing rabbit holes remaining (science lab, hospital, sports center) either don't fit in the current time frame or are functions that require being paired with a school. Now, this leaves me with three options:
- I could keep the building like this and sacrifice either one of the original functions of the rabbit holes to create a new school building or a new government house.
- I can split the buildings stylistically (that means only one of them can keep that dome) and use them as distinct buildings
- As above, but with the requisite uni assignments added, thus making it the provinces local college.
I'll be experimenting with the options and present the results.
Because it was a structure built on a plaza (the designated "big park" and festival ground) it might preclude turning it into the art gallery (which will instead be filled by St. Simeon's Church).
Here's a general idea of what it'd look like eventually. This building is the Canary House, an exclusive lounge (i.e. where the hacienderos go when they want to block of the blight of peasantry and simply going to Europe or maybe just Manila is out of the question).
Posts: 61
Thanks: 100 in 2 Posts
Anywho, this now represents two different buildings. The first building retains the architecture of the original one but is scaled down whereas the latter one takes the appearance of a smaller Colonial Filipino building. Given their proximity to the Jesuit Library, I would surmise that they are also one of the buildings owned or operated by the Church (or just the Jesuit order, which in the town's lore had either been kicked out or just returned from being kicked out by the Spanish government). The Jesuits occupied an intellectualized cultural space similar to the Peterans in the Sims Medieval, to put it simply. Thus, every building with an academic or scientific bent would probably be Jesuit institutions.
The arch is a reference to the one in the customs house.
As for the Customs House itself, its proximity to both the sea and the parian mean that it could very well be given one of two names.
- Oficina de aduana, the Spanish term for "customs house"
- Alcaiceria, the silk market complex, of which the customs house would be just one of its buildings.
Alternatively, the actual town's alcaiceria can be placed as a dedicated Chinese market somewhere near the Parian, though I kind of squared the Parian to be nearly completely composed of residential buildings to put the townies in.
Posts: 61
Thanks: 100 in 2 Posts
In the meantime I'll try to get clearance from the still-active CC users and, if possible, figure out how to compress the CC into a single file for convenience.
For the moment, I've committed to minimum CC building for the moment to reduce the number of homes I have to redo whence the time comes to minimize the CC and store content. The results have been surprising, to say the least. I'm working on the exteriors for the moment, working on the interiors not long after. Reimagining the buildings does let me rework them to make them look more realistic.
Assuming my work doesn't swamp me again, I should be able to introduce an unpopulated Beta version sometime in June for those interested in play-testing. In the meantime, here are a few minimal/no CC exterior builds I've had made. The number refers to the amount of CC and store content I used on the exteriors.
Casa Simeon, an affluent home
No CC; No store content.
Casa Romano de Oriente, the Jesuit library
CC (6); Store content (2)
Casa Honorata, the salon (right)
CC (~3); No store content
Casa Hilera, a townhouse (left)
CC (1); No store content
Who Posted
|