MTS has all free content, all the time. Find out how YOU can help to keep it running. Tell me how...

Harp Floating Stairs Set

by enable_llamas Posted 26th Jan 2021 at 9:56 PM - Updated 26th Jan 2021 at 10:19 PM by enable_llamas
16 Comments / replies (Who?) - 3 Feedback Posts, 13 Thanks Posts
This is a new mesh, and means that it's a brand new self contained object that usually does not require a specific Expansion pack (although this is possible depending on the type). It may have Recolours hosted on MTS - check below the description for more information.
Picked Upload! This is a picked upload! It showcases some of the best talent and creativity available on MTS and in the community.
My first stairs ever - which turned out to be a major pain in the ass - are finally defeated and done! Cause TS3 deserves fancy things, too. And we deserve more u-shaped stairs that don't require you to fiddle with cfe till exhaustion, destroying half your house in the process and having to deal with warped walls and bonkers levels. So, here you'll find:
  • Harp Floating Half Landing Stairs Left - $800, found under Stairs/Spiral Stairs; 4 presets, 2 recolorable channels
  • Harp Floating Half Landing Stairs Right - $800, found under Stairs/Spiral Stairs; 4 presets, 2 recolorable channels
  • Harp Stairs Partition 1 Tile - $175, found under Build Mode/Columns; 4 presets, 1 recolorable channel
  • Harp Stairs Partition 3 Tiles - $200, found under Build Mode/Columns; 4 presets, 1 recolorable channel
  • Harp Floating Stairs Up - $10, found under Stairs/Regular Stairs; 4 presets, 1 recolorable channel
  • Harp Floating Stairs Down - $10, found under Stairs/Regular Stairs; 4 presets, 1 recolorable channel
  • Harp Floating Stairs Partition Deco - $200, found under Decor/Sculptures; 4 presets, 1 recolorable channel

Important: The u-shaped, half-landing stairs are based on Gosik & Inge Jones' Cottage Stairs and function the same way. They use the spiral stairs' animation so they're not perfect, and they don't really have a matching cutout so you have to delete the necessary 2nd storey tiles yourself. While they're technically stackable, the same rules for regular spiral stairs apply here as well - they need to be facing the right way according to lot/world coordinates, otherwise prepare for routing tantrums galore.


I decided to add an option with regular stairs, too - you need both the Up & Down version for it to work. The "Up" goes from the lower to the middle floor, "Down" goes from the top to the middle. The floor height needs to be standard 16 steps for everything to line up. Build up your floors, place the stairs accordingly and then add the deco partition on the lowest floor. The partition has no footprint/doesn't interfere with routing.

The two column partitions also have no footprints in order not to be in the way of the stairs - sims will walk right through them if they're not blocked otherwise. I've also enabled them to be placed anywhere, including on upper floor levels' grid without the need for floor tiles underneath. They stack on seamlessly and leave no gap b/w different floors like eaxis columns do.


A big thank you to Gosik & Inge Jones for their work, otherwise these would've never seen the light of day!

Also huge thanks to everyone in the Creator's Cave Discord who gave ideas, helped battle numerous issues or was just there to listen to me whine about how much stairs suck. You guys are the best!

Polygon Counts:
Half Landing Stairs Left & Right:
high/med: 802f / 498f


Regular Stairs Up & Down :
high/med: 50f / n/a

Partition 3 Tiles:
high/med: 184f / 180f


Partition 1 Tile:
high/med: 64f / 60f


Deco Partition:
high/med: 1440f / 664f

Additional Credits:
Blender, Milkshape, TSRW, Photoshop, Gosik & Inge Jones for the original U-shaped stairs

You must have the expansion or stuff packs listed below installed to use this custom content. Please see the post text for any exceptions.

Sims 3
Key: - File was updated after upload was posted
Filename - Tip: You can click the magnifying glass to see the archive contents Size Downloads Date
enablellamasHarpFloatingStairs.rar

Size: 1.45 MB · Downloads: 4,484 · 26th Jan 2021
1.45 MB 4,484 26th Jan 2021
Don't forget to Thank the creator after downloading! Use the Thanks button located above the screenshots above.
Quick Guide:

1. Click the file listed on the Files tab to download the file to your computer.
2. Extract the zip, rar, or 7z file. Now you will have either a .package or a .sims3pack file.

For Package files:

1. Cut and paste the file into your Documents\Electronic Arts\The Sims 3\Mods\Packages folder. If you do not already have this folder, you should read the full guide to Package files first: Sims 3:Installing Package Fileswiki, so you can make sure your game is fully patched and you have the correct Resource.cfg file.
2. Run the game, and find your content where the creator said it would be (build mode, buy mode, Create-a-Sim, etc.).

For Sims3Pack files:

1. Cut and paste it into your Documents\Electronic Arts\The Sims 3\Downloads folder. If you do not have this folder yet, it is recommended that you open the game and then close it again so that this folder will be automatically created. Then you can place the .sims3pack into your Downloads folder.
2. Load the game's Launcher, and click on the Downloads tab. Find the item in the list and tick the box beside it. Then press the Install button below the list.
3. Wait for the installer to load, and it will install the content to the game. You will get a message letting you know when it's done.
4. Run the game, and find your content where the creator said it would be (build mode, buy mode, Create-a-Sim, etc.).


Extracting from RAR, ZIP, or 7z: You will need a special program for this. For Windows, we recommend 7-Zip and for Mac OSX, we recommend Keka. Both are free and safe to use.


Need more help?

If you need more info, see:
 
16 Comments / Replies (Who?) - 2 Feedback Posts, 13 Thanks Posts
Hide Thanks Posts for this thread (Show only feedback)
Mad Poster
THANKS POST
#2 Old 26th Jan 2021 at 11:12 PM
look at that MODERNITY!
Scholar
THANKS POST
#3 Old 27th Jan 2021 at 12:15 AM
Ooh, these stairs look amazing!
Lab Assistant
THANKS POST
#4 Old 27th Jan 2021 at 1:18 AM
Picked Download, WHEN??? ♥♥♥
Scholar
THANKS POST
#5 Old 27th Jan 2021 at 4:21 AM
Yaaaay! More stairs for TS3! Thaaaaanks a bunch
Scholar
THANKS POST
#6 Old 27th Jan 2021 at 10:40 AM
Oh. That's such a beautiful flourish! I guess this is a top of design.
Regards Vic ^_^
Field Researcher
THANKS POST
#7 Old 27th Jan 2021 at 1:54 PM
Absolute masterpiece. Not sure *how* you get such artful work done, but please don't ever stop <3
Lab Assistant
THANKS POST
#8 Old 27th Jan 2021 at 5:12 PM
As others have said it fills a need for this shape of stairs and for something really modern an Designer for interiors

Thanks
Trainee Moderator
staff: trainee moderator THANKS POST
#9 Old 27th Jan 2021 at 6:42 PM
Looks great!
Test Subject
THANKS POST
#10 Old 27th Jan 2021 at 8:10 PM
wow!!Great job
Lab Assistant
THANKS POST
#11 Old 27th Jan 2021 at 8:21 PM
Wow, when I saw this design I wished I could have it in Sims 3. You literally made my wish come true :D
Instructor
Original Poster
#12 Old 30th Jan 2021 at 1:17 PM
Quote:
Originally Posted by desiree101
Ooh, these stairs look amazing!

Quote:
Originally Posted by Victor_tor
Oh. That's such a beautiful flourish! I guess this is a top of design.
Regards Vic ^_^

Quote:
Originally Posted by Collector
As others have said it fills a need for this shape of stairs and for something really modern an Designer for interiors

Thanks

Quote:
Originally Posted by fascisthater
Looks great!

Quote:
Originally Posted by spysim.73
wow!!Great job

Thank you guys! ♥

Quote:
Originally Posted by murfee
look at that MODERNITY!

We deserve nice things for ts3 and we're going to get them, damn it!

Quote:
Originally Posted by Deniisu
Picked Download, WHEN??? ♥♥♥

Lol it's funny cause the weirdest things get picked, I've got a pair or jeans that are just so random and like... why? But thank you so much! ♥

Quote:
Originally Posted by aisquared
Yaaaay! More stairs for TS3! Thaaaaanks a bunch

Glad you like them and we really need more stairs

Quote:
Originally Posted by MissPat
Absolute masterpiece. Not sure *how* you get such artful work done, but please don't ever stop <3

I see random cool RL item and think why don't we have this in ts3, then try to make it and it find out why occasionally they work out, tho lol

Quote:
Originally Posted by Slamyy
Wow, when I saw this design I wished I could have it in Sims 3. You literally made my wish come true :D

I aim to please
Lab Assistant
THANKS POST
#13 Old 31st Jan 2021 at 2:40 PM
Wow, this is amazing. I haven't seen a really innovative set of stairs in actual, literal years! Thank you!
Instructor
Original Poster
#14 Old 10th Feb 2021 at 5:23 PM
Quote:
Originally Posted by Raminess
Wow, this is amazing. I haven't seen a really innovative set of stairs in actual, literal years! Thank you!

Thank you! Glad you like it!
Mad Poster
THANKS POST
#15 Old 17th Feb 2021 at 11:04 PM
Hi, this is beautiful. I liked the concept of Gosik's stairs, but the reason I never downloaded his was because I'm not into antiques. Modern stairs are more to my liking. Thank you so much for making it.

I'm curious about one thing, on the 1/2 stairs you have both left and right. But the description said it uses the animation from the spiral staircase, which from EA is only 1 way. Did you added a reverse animation to the other stair?
Instructor
Original Poster
#16 Old 18th Feb 2021 at 1:34 PM
Quote:
Originally Posted by nitromon
Hi, this is beautiful. I liked the concept of Gosik's stairs, but the reason I never downloaded his was because I'm not into antiques. Modern stairs are more to my liking. Thank you so much for making it.

I'm curious about one thing, on the 1/2 stairs you have both left and right. But the description said it uses the animation from the spiral staircase, which from EA is only 1 way. Did you added a reverse animation to the other stair?

The original Gosik ones have a left and right part, too - so these are the same animation-wise. It's not flipped and one side looks arguably more borked while in use but since both don't match I usually don't pay attention to it. Unfortunately I have no idea how to do anything with animations.

There's a script for another version at SimLogical that eliminates the animation altogether - you can swap it out if the visuals are too distracting.
Lab Assistant
THANKS POST
#17 Old 25th Feb 2021 at 4:12 PM
This is soooo great! More stairs for TS3, Thanks!