- Site Map >
- Community >
- Sims Discussion >
- Sims 3 >
- General - Helping out MadRayneSims over on Tumblr
- Site Map >
- Community >
- Sims Discussion >
- Sims 3 >
- General - Helping out MadRayneSims over on Tumblr
Replies: 12 (Who?), Viewed: 963 times.
#1
14th Jun 2021 at 3:28 PM
Posts: 800
Helping out MadRayneSims over on Tumblr
Hope it's alright putting this here, I just went with general since this isn't about anything on MTS. I'm putting this up in the hopes someone can help me figure out how to help them out exactly.So, while looking around at interesting tumblr blogs recently, I came across theirs here. They've been doing recreations of objects from past Sims games and even the console versions to TS2, TS3, and TS4. However, they've hit a bit of a roadblock in regards to TS3, which is what I'm most interested in.
MadRayne says they're not able to create some of the things they want, tables in particular, because they don't function properly in game. They used the NuMica folding table from TS1 as an example, in game the table still behaves as a 2x1 instead of a 2x2 and the chairs clip through the table. They've also found that other people were successfully able to create them, so they're not entirely sure what's going wrong.
MadRayne says they haven't created as much for TS3 and have only used TSRW to create their objects. They say if they can't figure out how to fix the slot issues, they may potentially stop creating them for TS3.
I'm hoping someone knows what to do here/what steps they might further need to take. Their content is great and very faithful and it'd be a shame for TS3 to lose out. But I'd also just like to help them out if I can, because I know what it's like to be at my wits end with something.
Edit: Here's a pic so everyone can see what they're dealing with.
You have been chosen. They will come soon.
Advertisement
#2
14th Jun 2021 at 10:51 PM
Posts: 3,654
Can't the person post in the create section here for help? It is not a requirement to post things here for one to get help from this community. 99% of the CAW questions are about worlds that will never be uploaded here, for example. This is an information site as well as a CC one.
#3
14th Jun 2021 at 11:20 PM
Posts: 800
Quote: Originally posted by daisylee
Can't the person post in the create section here for help? It is not a requirement to post things here for one to get help from this community. 99% of the CAW questions are about worlds that will never be uploaded here, for example. This is an information site as well as a CC one. |
I'm not sure if they have an account here or I'd definitely recommend it. Some people host their content exclusively on tumblr nowadays if they do streaming/stories etc.
Their main issue is getting some of their TS3 creations to work properly in game. So if they're not already on here, they might not want to register just for that.
You have been chosen. They will come soon.
#4
14th Jun 2021 at 11:32 PM
Posts: 982
Thanks: 2400 in 16 Posts
They need to move the position of the slot entries that include "_chr_" and "_eat_" in their name. They're in the "Container Entries" in TSR Workshop. The "chr" slots are for the chairs and "eat" slots are for the food plates. Now ADDING more slots may be tricky. It doesn't always work. If the table she's planning to do has 8 slots, it's best to start with another table with 8 slots, i.e. all 3x1 tables.
#5
14th Jun 2021 at 11:39 PM
Posts: 800
Quote: Originally posted by Naus Allien
They need to move the position of the slot entries that include "_chr_" and "_eat_" in their name. They're in the "Container Entries" in TSR Workshop. The "chr" slots are for the chairs and "eat" slots are for the food plates. Now ADDING more slots may be tricky. It doesn't always work. If the table she's planning to do has 8 slots, it's best to start with another table with 8 slots, i.e. all 3x1 tables. |
Wow, that was fast! Thanks for the input Naus.
I hate to ask, but since you have your own tumblr do you think you could pass the info along? I don't have one, and I'm not sure if it'd be easy for me to relay to them anonymously if they need more help.
Edit: Actually, this should probably be enough to get her started at the very least. I'll pass the info along and update accordingly.
You have been chosen. They will come soon.
#6
15th Jun 2021 at 1:07 AM
Posts: 1,415
Quote: Originally posted by Naus Allien
They need to move the position of the slot entries that include "_chr_" and "_eat_" in their name. They're in the "Container Entries" in TSR Workshop. The "chr" slots are for the chairs and "eat" slots are for the food plates. Now ADDING more slots may be tricky. It doesn't always work. If the table she's planning to do has 8 slots, it's best to start with another table with 8 slots, i.e. all 3x1 tables. |
That happens to be the answer to something that's been vexing me for some time about a particular cc table, which also had the chairs clipping into it as shown in Jathom95's post. I was particularly keen to use that table so, although it wasn't me asking, thanks anyway for the insight.
Legend is history as we would like it to be. We pick through the dusts of time for what is worth keeping and, here and there, we occasionally find treasure.
Simblr: Elyndaworld *** Wordpress: Tales of Nantrelor
#7
15th Jun 2021 at 3:00 AM
Posts: 800
Quote: Originally posted by Elynda
That happens to be the answer to something that's been vexing me for some time about a particular cc table, which also had the chairs clipping into it as shown in Jathom95's post. I was particularly keen to use that table so, although it wasn't me asking, thanks anyway for the insight. |
I'm always glad to hear when someone else gets something useful out of a thread like this.
I felt a little selfish posting the thread in the first place. It was kinda like "Hey, I don't know what to do here. Can someone else just tell me?" Or it felt that way at least. But honestly, that's really the great thing about this site. You can share that knowledge with each other and even to others who may not frequent MTS.
You have been chosen. They will come soon.
#9
15th Jun 2021 at 3:34 AM
Posts: 800
It's one of those irrational feelings, I know.
I guess it's just how you can occasionally feel like you're lumping your issues or someone else's into another person's lap just waiting for an answer, if that makes sense.
But like you said, that's the whole point of a community. This is trying to help someone find an answer to a roadblock they've hit with their CC. Not like you're asking someone to make something from scratch.
You have been chosen. They will come soon.
I guess it's just how you can occasionally feel like you're lumping your issues or someone else's into another person's lap just waiting for an answer, if that makes sense.
But like you said, that's the whole point of a community. This is trying to help someone find an answer to a roadblock they've hit with their CC. Not like you're asking someone to make something from scratch.
You have been chosen. They will come soon.
#10
6th Aug 2021 at 2:47 AM
Posts: 800
Alright, so coming back to this thread with some new input. Just checked over on tumblr, MadRayne's attempting to add the new slots to the table. Chairs appear correctly in a visual sense now, as in they don't clip through the table. But she can't get most of them to function. According to her, only about 2/8 seats function properly when placed around the table. The rest don't. Anybody got any ideas?
You have been chosen. They will come soon.
You have been chosen. They will come soon.
#11
6th Aug 2021 at 3:25 AM
Last edited by KatyFernlily : 6th Aug 2021 at 6:29 AM.
Posts: 1,852
Grande Lama converted the chairs - if that helps - https://grandelama.tumblr.com/post/...turned-20-years
#12
8th Aug 2021 at 1:19 AM
Posts: 800
Thank you Katy.
For anyone who's been following this thread, MadRayne thankfully was able to get it sorted out.
Also, if you've been looking for a nice versatile but simple table lamp, she just released a recreation of the TS1 lamp as well as the folding table. Check it out!
https://madraynesims.tumblr.com/pos...-numica-folding
Here's a pic if interested:
You have been chosen. They will come soon.
For anyone who's been following this thread, MadRayne thankfully was able to get it sorted out.
Also, if you've been looking for a nice versatile but simple table lamp, she just released a recreation of the TS1 lamp as well as the folding table. Check it out!
https://madraynesims.tumblr.com/pos...-numica-folding
Here's a pic if interested:
You have been chosen. They will come soon.
#13
8th Aug 2021 at 9:56 AM
How absolutely brilliant, what a clever modder! Those are lovely, thanks for the link @Jathom95
I will choose a path that's clear- I will choose free will
-RUSH- -RADIO- -RADIO- -EON- -ARCHIVES-
Simpeople and Me Archive- 11Dots Archive- My Sims World Archive- Sims 1 Archive
Angel Classic Rock Mix!
-RUSH- -RADIO- -RADIO- -EON- -ARCHIVES-
Simpeople and Me Archive- 11Dots Archive- My Sims World Archive- Sims 1 Archive
Angel Classic Rock Mix!
Who Posted
|